The prime finished product of Sohar Steel Group is the Steel Reinforcement Bars or simply Rebars.
8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 32mm and 40mm.
The Rebars are produced confirming to British Standard BS 4449 : 2005 (B500B).
These Rebars carry “SSBS” as our Trade mark and CARES Product Certification mark. In addition, it also carry “DCL Product Certification” mark when required by Customer.
Low carbon content, higher yield strength, tensile strength, and percentage elongation are the prime advantages of Sohar Steel’s Rebars.
Chemical Properties of Rebars
Tensile Properties of Rebars
|As per BS:4449-2005(B500B)||As per ASTM A-615 Gr.60||As per SASO-SSA/1992|
|Y.S. = 500N/mm2 (min)||Y.S. = 420N/mm2 (min)||Y.S. = 460N/mm2 (min)|
|Y.S./Y.S.Ratio = 1.08(min)||T.S. = 620N/mm2 (min)||T.S. = 506N/mm2 (min)|
|% Elongation = 14 (min)||% Elongation = 9 (8-20mm)||% Elongation = 12 (min)|
|Total Elongation = 5%(min)||% Elongation = 8 (25mm)||Bend = 3(d)|
|Rebend <= 16mm = 4(d)||% Elongation = 7 (32mm)||Rebend = 5(d)|
|Rebend > 16mm = 7(d)||Bend 16mm= 2(d)||[where d = bar diameter]|
|Bend >16mm25mm = 5()|
|Bend >32mm = 7(d)|
Powered by Froala Editor