Copyright: (C) 2014, All Rights Reserved, Sohar Steel LLC

The prime finished product of Sohar Steel is the BS 4449 -2009 (B500B) rebars that are produced at Sharq Sohar Steel Rolling Mills. Rebars of nominal diameter 8, 10, 12, 14, 16, 18, 20, 22, 25 and 32mm are produced at the rolling mill.

The two other finished products of the company, produced at MECI are Weld-Mesh and Epoxy Coated Rebars. Weld Meshes are of different sizes such as square and structural meshes and are of BS 4483:2005 grade. weld mesh is also manufactured at MECI. Weld Meshes are manufactured from ribbed/plain wire rods of nominal diameters from 5mm to 10mm. Epoxy Coated rebars are used for construction in areas that are prone to corrosion such as ares with possible fresh and salt water immersion and/or cyclic salt fog/UV-condensation exposure.

Please Click Here to download a complete product brochure.

Rebars

rebars



The prime finished product of Sohar Steel is the BS 4449 -2009 (B500B) rebars that are produced at Sharq Sohar Steel Rolling Mills. Rebars of nominal diameter 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm and 32mm are produced at the rolling mill. Bars carrying both SSBS and CARES are mark are produced based on specific customer requirements. Low carbon content, higher yield strength, tensile strength, and percentage elongation are the prime advantages of Sohar Steel's rebars.

Epoxy Coated Rebars

epoxy



The rebars produced at Sharq Sohar Steel Rolling Mills are epoxy coated at the Middle East Conversion Industries (MECI)unit. Rebars of all sizes from 8mm to 32mm are epoxy coated at MECI as per ASTM 775M standard. The fusion bonded epoxy coating, which is done with the help of a high speed shot blasting machine provides protection from corrosion and rusting. The epoxy coated rebar bundles are wrapped in poly ethylene cover for better shielding during transport and storage.

Weld Mesh

weldmesh



Apart from epoxy coated rebars, BS 4483:2005 grade weld mesh is also manufactured at MECI. All types of standard mesh such as square mesh and structural mesh are manufactured from ribbed/plain wire rods of nominal diameters from 5mm to 10mm. Steel deformed bars that are cold rolled of various nominal diameters such as 5, 6, 7, 8, 9, 10 and length of upto 12 meters are also used to produce weld mesh.

Billets

billets



CARES certified billets of 100, 120 and 130 square millimeter cross section of either 6 meter or 12 meter length are manufactured at Sohar Steel's Scrap Melt Shop (SMS). Billets are produced from a mix of steel metal scrap such as HMS1(Heavy Metal Scrap), HMS2, LMS (Light Metal Scrap), Shredded, and/or bundle. The melt shop is also capable of producing billets from DRI (Direct Reduced Iron) and/or HBI (Hot Briquette Iron).

Friday the 20th. .